Chemate Group Logo

A1 Anatase Titanium Dioxide

Jinan Yuxing A1 Titanium Dioxide Bag

A1 Anatase Titanium Dioxide

The A1 titanium dioxide is a white anatase TiO₂ pigment powder manufactured by Jinan Yuxing Chemical Co., Ltd. The manufacturer’s specification lists a minimum TiO₂ content of 98%, a minimum dry whiteness of 95.0%, and a relative tinting strength of at least 100% compared with its reference sample. Jinan Yuxing describes A1 as a white powder with good whiteness, high tinting strength, and strong hiding power.

Jinan Yuxing A1 Titanium Dioxide Specifications

PropertyUnitManufacturer’s specification
TiO₂ content%≥ 98
Color compared with reference sample—No lower than the reference sample
Relative tinting strength%≥ 100
Volatile matter at 105°C%≤ 0.5
Volatile matter at 105°C after 24 hours of conditioning at 23 ± 2°C and 50 ± 5% RH%≤ 0.5
Water-soluble matter%≤ 0.5
pH of aqueous suspension—6.5–8.0
Oil absorptiong/100 g26
Residue on a 45 μm sieve%≤ 0.1
Resistivity of aqueous extractΩ·m≥ 20
Dry whiteness%≥ 95.0

What the A1 TiO2 Specifications Mean for Your Formulation

>> Dry Whiteness and Finished-Product Color

The 95.0% minimum dry whiteness is a measurement of the dry pigment. The shade of a finished coating, paper, or molded part also depends on the resin or binder, fillers, other pigments, and dispersion. When comparing A1 TiO2 with your current grade, prepare samples at the same pigment loading and compare them under the same lighting.     

>> Tinting Strength and Hiding Power   

The 100% minimum relative tinting strength is measured against the manufacturer’s reference sample. It describes how strongly the pigment lightens a colored mixture under the test conditions. For coatings, hiding power is best checked separately with a drawdown over a black-and-white card at a controlled film thickness. These two checks help determine whether A1 can meet your target shade and coverage at your current dosage.  

>> Oil Absorption and Dispersion     

The specification lists an oil absorption value of 26 g/100 g and a maximum 45 μm sieve residue of 0.1%. Oil absorption is useful when comparing pigments for liquid formulations because changing grades can affect viscosity at the same loading. Sieve residue indicates the amount of coarse material retained in the test. If surface smoothness or specks are critical, check the dispersion and finish in a production-relevant trial.

FAQs of A1 Titanium Dioxide Yuxing

1. Is Jinan Yuxing A1 an anatase or rutile titanium dioxide grade?

Jinan Yuxing A1 is an anatase titanium dioxide grade. If your purchase specification requires a rutile pigment or a grade qualified for a particular outdoor application, include that requirement in your inquiry so the supplier can quote a suitable grade.

2. What is the TiO₂ content of Jinan Yuxing A1?

The manufacturer’s specification gives a minimum TiO₂ content of 98%. It also specifies a minimum dry whiteness of 95.0% and a pH range of 6.5–8.0 for the aqueous suspension. Request the batch COA if you need the measured values for a specific shipment.

3. Can Jinan Yuxing A1 replace another manufacturer’s A1 grade?

It can be evaluated as a replacement. Test both grades at the same dosage in your existing formulation and compare shade, opacity, dispersion, and any process-sensitive properties such as viscosity. If you need to adjust the dosage, compare costs at the dosage that meets your finished-product requirements.

4. How can I get a Jinan Yuxing A1 titanium dioxide price?

Send Chemate Group your required quantity, intended application, and destination port. If you are replacing another anatase TiO₂ grade, include the manufacturer and grade you currently use, along with any acceptance criteria. You can also request the applicable technical documents, packaging details, and a sample for evaluation.

Send Us A Message Now

X

    Please feel free to inquiry us now, and we will reply you in 24 hours.