Hot Sale Sabic LDPE Low Density Polyethylene

Home » Sabic LDPE

Hot Sale Models of Sabic LDPE

HP2022JN LDPE is suitable for general-purpose packaging. They exhibit better draw down, good optical and mechanical properties. It contains slip and antiblock additives. It can be used for thin shrink film, lamination film, producing bags, textile packaging, soft goods packaging, general-purpose bags with good optics and t-shirts carrier bags.

SABIC® LDPE HP2022JN TDS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
POLYMER PROPERTIES
Melt Flow Rate (MFR)
at 190°C and 2.16 kg	2.0	g/10 min	ASTM D1238
Density
at 23°C	922	kg/m³	ASTM D1505
MECHANICAL PROPERTIES
Dart Impact Strength	2	g/µm	ASTM D1709
OPTICAL PROPERTIES
Haze (1)	10	%	ASTM D1003
Gloss
at 45°	55	-	ASTM D2457
FILM PROPERTIES
Tensile Properties
stress at break, MD	29	MPa	ASTM D882
stress at break, TD	15	MPa	ASTM D882
strain at break, MD	120	%	ASTM D882
strain at break, TD	530	%	ASTM D882
stress at yield, MD	11	MPa	ASTM D882
stress at yield, TD	11	MPa	ASTM D882
1% secant modulus, MD	180	MPa	ASTM D882
1% secant modulus, TD	230	MPa	ASTM D882
Tear Resistance
MD	18	g/µm	ASTM D1922
TD	4	g/µm	ASTM D1922
THERMAL PROPERTIES
Vicat Softening Temperature	92	°C	ASTM D1525

2022NDF LDPE is a grade typically used in foam applications. It is without slip and anti-block additives. This grades is ideally suitable for foaming processes using both physical and chemical blowing agents.

SABIC® LDPE HP2022NDF TDS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
POLYMER PROPERTIES
Melt Flow Rate (MFR)
at 190°C and 2.16 kg	2.0	g/10 min	ASTM D1238
Density
at 23°C	922	kg/m³	ASTM D1505
THERMAL PROPERTIES
Vicat Softening Temperature	92	°C	ASTM D1525
Crystallization Temperature	95	°C	ISO 11357-3
Avg. Heat of Fusion	113	J/g	ISO 11357-3
Melting Point	110	°C	SABIC method

HP2023JN LDPE is suitable for general-purpose packaging. It exhibits better draw down, good optical and mechanical properties. It contains slip and antiblock additives.

SABIC® LDPE HP2023JN TDS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
POLYMER PROPERTIES
Melt Flow Rate (MFR)
at 190°C and 2.16 kg	2.0	g/10 min	ASTM D1238
Density
at 23°C	923	kg/m³	ASTM D1505
OPTICAL PROPERTIES
Haze	8	%	ASTM D1003
Gloss
at 45°	61	%	ASTM D2457
FILM PROPERTIES
Tensile Properties
stress at break, MD	20	MPa	ASTM D882
stress at break, TD	15	MPa	ASTM D882
strain at break, MD	300	%	ASTM D882
strain at break, TD	588	%	ASTM D882
stress at yield, MD	12	MPa	ASTM D882
stress at yield, TD	12	MPa	ASTM D882
1% secant modulus, MD	235	MPa	ASTM D882
1% secant modulus, TD	271	MPa	ASTM D882
Tear Resistance
MD	15	g/µm	ASTM D1922
TD	11	g/µm	ASTM D1922
Dart Impact F50	2	g	ASTM D1709
THERMAL PROPERTIES
Vicat Softening Temperature	92	°C	ASTM D1525

HP2023NN LDPE is suitable for general-purpose packaging. It exhibits better draw down, good optical and mechanical properties. It contains no slip, no antiblock and no antioxidant additives.

SABIC® LDPE HP2023NN TDS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
POLYMER PROPERTIES
Melt Flow Rate (MFR)
190°C and 2.16 kg	2.0	g/10 min	ASTM D1238
Density
at 23°C	923	kg/m³	ASTM D1505
OPTICAL PROPERTIES
Haze	8	%	ASTM D1003
Gloss
at 45°	61	%	ASTM D2457
FILM PROPERTIES
Tensile Properties
stress at break, MD	20	MPa	ASTM D882
stress at break, TD	15	MPa	ASTM D882
strain at break, MD	300	%	ASTM D882
strain at break, TD	588	%	ASTM D882
stress at yield, MD	12	MPa	ASTM D882
stress at yield, TD	12	MPa	ASTM D882
1% secant modulus, MD	235	MPa	ASTM D882
1% secant modulus, TD	271	MPa	ASTM D882
Tear Resistance
MD	15	g/µm	ASTM D1922
TD	11	g/µm	ASTM D1922
Dart Impact F50	2	g	ASTM D1709
THERMAL PROPERTIES
Vicat Softening Temperature	92	°C	ASTM D1525

HP4024N LDPE is suitable for producing general-purpose films and it gives excellent processability and optical properties with good mechanical properties. No slip and no antiblock additives. It can be used for high clarity laundry bags, textile wrapping films, produce bags, zip lock bags and master batch.

SABIC® LDPE HP4024N TDS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
POLYMER PROPERTIES
Melt Flow Rate (MFR)
at 190°C and 2.16 kg	4.0	g/10 min	ASTM D1238
Density
at 23°C	923	kg/m³	ASTM D1505
MECHANICAL PROPERTIES
Dart Impact Strength	2	g/µm	ASTM D1709
OPTICAL PROPERTIES
Haze	6	%	ASTM D1003
Gloss
at 45°	68	-	ASTM D2457
FILM PROPERTIES
Tensile Properties
stress at break, MD	32	MPa	ASTM D882
stress at break, TD	24	MPa	ASTM D882
strain at break, MD	265	%	ASTM D882
strain at break, TD	600	%	ASTM D882
stress at yield, MD	10	MPa	ASTM D882
stress at yield, TD	10	MPa	ASTM D882
1% secant modulus, MD	277	MPa	ASTM D882
1% secant modulus, TD	224	MPa	ASTM D882
Tear Resistance
MD	10	g/µm	ASTM D1922
TD	14	g/µm	ASTM D1922
THERMAL PROPERTIES
Vicat Softening Point	92	°C	ASTM D1525

HP4024WN LDPE is suitable for producing general-purpose films and it gives excellent processability and optical properties with good mechanical properties. Contain slip and antiblock additives.

SABIC® LDPE HP4024WN TDS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
POLYMER PROPERTIES
Melt Flow Rate (MFR)
at 190°C and 2.16 kg	4.0	g/10 min	ASTM D1238
Density
at 23°C	923	kg/m³	ASTM D1505
MECHANICAL PROPERTIES
Dart Impact Strength	2	g/µm	ASTM D1709
OPTICAL PROPERTIES
Haze	6	%	ASTM D1003
Gloss
at 45°	68	%	ASTM D2457
FILM PROPERTIES
Tensile Properties
stress at break, MD	32	MPa	ASTM D882
stress at break, TD	24	MPa	ASTM D882
strain at break, MD	265	%	ASTM D882
strain at break, TD	600	%	ASTM D882
stress at yield, MD	10	MPa	ASTM D882
stress at yield, TD	10	MPa	ASTM D882
1% secant modulus, MD	277	MPa	ASTM D882
1% secant modulus, TD	224	MPa	ASTM D882
Tear Resistance
MD	10	g/µm	ASTM D1922
TD	14	g/µm	ASTM D1922
THERMAL PROPERTIES
Vicat Softening Temperature	92	°C	ASTM D1525

HP4024ZN LDPE is suitable for producing general-purpose films and it gives excellent processability and optical properties with good mechanical properties. Contain high level of slip and antiblock additives.

SABIC® LDPE HP4024ZN TDS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
POLYMER PROPERTIES
Melt Flow Rate (MFR)
at 190°C and 2.16 kg	4.0	g/10 min	ASTM D1238
Density
at 23°C	923	kg/m³	ASTM D1505
MECHANICAL PROPERTIES
Dart Impact Strength	2	g/µm	ASTM D1709
OPTICAL PROPERTIES
Haze (1)	6	%	ASTM D1003
Gloss
at 45°	68	-	ASTM D2457
FILM PROPERTIES
Tensile Properties
stress at break, MD	32	MPa	ASTM D882
stress at break, TD	24	MPa	ASTM D882
strain at break, MD	265	%	ASTM D882
strain at break, TD	600	%	ASTM D882
stress at yield, MD	10	MPa	ASTM D882
stress at yield, TD	10	MPa	ASTM D882
1% secant modulus, MD	277	MPa	ASTM D882
1% secant modulus, TD	224	MPa	ASTM D882
Tear Resistance
MD	10	g/µm	ASTM D1922
TD	14	g/µm	ASTM D1922
THERMAL PROPERTIES
Vicat Softening Temperature	92	°C	ASTM D1525

Would Like The Quotation

Leave more about your requirements, such as, brands, models, quantity, package, country, etc.

Inquiry Us Now

full Grades of Sabic LDPE We can Supply

Sabic LDPE	Grades
General grade	2102NOW, 2102N3W, 2402H3W, HP2022JN, HP2023JN, HP2023NN,
Film grade	2100NO, 2100NOW, 2101NOW, 2200HO, 2200H2, 2201HO, 2201H1, 2201H3W, 2404H4, 2404NO, 2500NO, 2501NO, 2501NOW, 2600HO, HP0322N, HP0322NN, HP0323NN, HP0722NN, HP0723JN, HP0823NN, HP20023, HP2025NN, HP2027LN, HP2027NN, HP4023WN, HP4024N, HP4023WN, HP4023WN, HP4027JN, HP4027NN, HP7022, HP7023
Tubular grade	2005EC, 2008NO, 2015NO, 2308NO, 2402H3W , 2404NO,
Masterbatch grade	1965NO,
Ultra Melt Strength (UMS) grade	1905UO, 2202UO
Foam applications	2004CX3, 2102XO, 2102X3, 2402CXO, 2600HO, 2602X1, HP0323NN, HP0823NN, HP2024JDF, HP2024NDF,
Food grade	1922NO, 2201HOW, 2201H1W, 2602HOW, 2801HOW,
blown film extrusion grade	2202H3W, 2402HO, HP0321NN, HP0723JN, HP0724NN, HP4025ZN,

As a leading reliable supplier of plastic chemicals, Chemate can guarantee the best price and good quality. Meawhile, we can also supply other brands of LDPE, check more from our website or contact us for help.