Sabic B1254 HDPE Resin

Home » Sabic B1254

Sabic B1254

B1254 is a High Density Polyethylene specially developed for blow molding and jerry cans.

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
POLYMER PROPERTIES (1)
Melt Flow Rate (MFR)
@ 190°C & 21.6 kg load	13	g/10 min	ISO 1133
@ 190°C & 2.16 kg load	0.14	g/10 min	ISO 1133
Density
@ 23°C	955	g/cm³	ASTM D1505
MECHANICAL PROPERTIES (2)
Tensile strength
@ Yield, 500mm/min, Type IV bar	30	MPa	ASTM D638
Tensile elongation at break
10mm/min, Type IV bar	>902	%	ASTM D638
Flexural Modulus
Tangent – 16:1 span:depth, 0.5 in/min	1047	MPa	ASTM D790
Izod Impact Strength
@ 23°C	211	J/m	ASTM D-256
Durometer Hardness
(Shore D)	58	–	ASTM D2240
THERMAL PROPERTIES (2)
Vicat Softening Temperature
Loading 1, Rate A	127	°C	ASTM D1525
Heat deflection temperature
66 psi, Method A	76	°C	ASTM D648